Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931     

2-Methyltetrahydrofuran (2-MeTHF) as a versatile green solvent for the synthesis of amphiphilic copolymers via ROP,FRP, and RAFT tandem polymerizations

2-methyltetrahydrofuran (2-MeTHF) is a readily available, inexpensive, neoteric, bio-based solvent. It has been adopted across a wide range of chemical processes including the batch manufacture of fine chemicals, enzymatic polycondensations and ring opening polymerizations. To reduce the environmental burden related to the synthesis of pharmaceutical-grade polymers based on lactide and caprolactone, we envisaged the use of 2-MeTHF. For the first time, we combined a series of metal-free and enzymatic ROPs with free radical and controlled RAFT polymerizations (carried out separately and in tandem) in 2-MeTHF, in order to easily tune the chemistry and the architecture of the final polymers. After a simple purification, the amphiphilic polymers were formulated into nanoparticles and tested for their cytocompatibility in three model cell lines, to assess their application as potential polymeric excipients for nanomedicines.     

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Investigation of photopolymerization kinetics of 4-(4-methacryloyloxyphenyl)-butan-2-one (1) in comparison with 2-phenoxyethyl methacrylate (2) and phenyl methacrylate (3) using a UV-LED emitting at 395 nm shows significantly faster polymerization of 1 compared to both 2 and 3 at 40°C. Vitrification affects photopolymerization kinetics of all methacrylates under investigation. Interestingly, quantitative final conversion is observed during photoinitiated polymerization of 1 and 2 whereas 3 shows limited conversion at about 80%. Furthermore, higher degree of polymerization is obtained by photoinitiated polymerization of 1 compared to 2 and 3. This shows that the 3-oxobutyl substituent at the phenyl ring of 1 significantly affects both polymerization kinetics and final conversion of the photoinitiated polymerization. Moreover, an additional higher molecular weight fraction is observed in case of polymerization of 1 at 85°C that is above the glass transition temperature of the polymer formed during photoinitiated polymerization. As a thermal polymerization at 85°C in the absence of light results in a high molecular weight polymer as well, an additional thermal process may be discussed as reason for the higher molecular weight polymer fraction in case of the photopolymer made at 85°C.     

Redox-Induced Modulation of Exchange Interaction in a High-Spin Ground-State Diradical/Triradical System

A triplet ground-state diradical molecule, bis(nitronyl nitroxide)-substituted diphenyldihydrophenazine ( 1 ^..), that can be converted into a one-electron oxidized species, 1 ^{… +} , in the quartet ground state has been developed. Surprisingly, these species, 1 ^.. and 1 ^{… +} , can be used under ambient conditions because they are reasonably stable under aerobic conditions, even in solution. The temperature-dependent magnetic susceptibilities reveal that 1 ^.. and 1 ^{… +} are in the triplet state, with a weak exchange interaction (J₁/k_B = +3.1 K) and quartet ground state with a strong exchange interaction (J₂/k_B = +160 K), respectively. The interconversion between the neutral and one-electron oxidized species can be realized through electrochemical reactions. Significantly different absorption bands in the near-IR region newly appeared in the electronic spectra acquired during electrochemical oxidation/reduction.     

One Way Traffic: Base-to-Backbone Hole Transfer in Nucleoside Phosphorodithioate

The directionality of the hole-transfer processes between DNA backbone and base was investigated by using phosphorodithioate [P(S⁻)=S] components. ESR spectroscopy in homogeneous frozen aqueous solutions and pulse radiolysis in aqueous solution at ambient temperature confirmed initial formation of G^.+-P(S⁻)=S. The ionization potential of G-P(S⁻)=S was calculated to be slightly lower than that of guanine in 5′-dGMP. Subsequent thermally activated hole transfer from G^.+ to P(S⁻)=S led to dithiyl radical (P-2S^.) formation on the μs timescale. In parallel, ESR spectroscopy, pulse radiolysis, and density functional theory (DFT) calculations confirmed P-2S^. formation in an abasic phosphorodithioate model compound. ESR investigations at low temperatures and higher G-P(S⁻)=S concentrations showed a bimolecular conversion of P-2S^. to the σ²-σ*¹-bonded dimer anion radical [-P-2S 2S-P-]⁻ [ΔG (150 K, DFT)=−7.2 kcal mol⁻¹]. However, [-P-2S 2S-P-]⁻ formation was not observed by pulse radiolysis [ΔG° (298 K, DFT)=−1.4 kcal mol⁻¹]. Neither P-2S^. nor [-P-2S 2S-P-]⁻ oxidized guanine base; only base-to-backbone hole transfer occurs in phosphorodithioate.     

N,N′-Ethylene-Bridged Bis-2-Aryl-Pyrrolinium Cations to E-Diaminoalkenes: Non-Identical Stepwise Reversible Double-Redox Coupled Bond Activation Reactions

This work presents a stepwise reversible two-electron transfer induced hydrogen shift leading to the conversion of a bis-pyrrolinium cation to an E-diaminoalkene and vice versa. Remarkably, the forward and the reverse reaction, which are both reversible, follow two completely different reaction pathways. Establishing such unprecedented property in this type of processes was possible by developing a novel synthetic route towards the starting dication. All intermediates involved in both the forward and the backward reactions were comprehensively characterized by a combination of spectroscopic, crystallographic, electrochemical, spectroelectrochemical, and theoretical methods. The presented synthetic route opens up new possibilities for the generation of multi-pyrrolinium cation scaffold-based organic redox systems, which constitute decidedly sought-after molecules in contemporary chemistry.     

The Forgotten Pyrazines: Exploring the Dakin–West Reaction

Pyrazines are an underreported class of N-heterocycles available from nitrogen-rich biomass presenting an interesting functional alternative for current aromatics. In this work, access to pyrazines obtained from amino acids by using the 90 year old Dakin–West reaction was explored. After a qualitative screening several functional proteinogenic amino acids proved good substrates for this reaction, which were successfully scaled to multigram scale synthesis of the corresponding intermediate α-acetamido ketones. Subsequently, the conditions towards pyrazine formation using δ-amino-levulinic acid were optimized, and these were employed to synthesize a relevant set of five functional dimethylpyrazines in high purity. These pyrazines can be considered a versatile toolbox of aromatic building blocks for a wide range of applications, such as in the synthesis of polymers or metal–organic frameworks.     

Reactivity of Diarylnitrenium Ions

Hydride abstraction from diarylamines with the trityl ion is explored in an attempt to generate a stable diarylnitrenium ion, Ar₂N⁺. Sequential H-atom abstraction reactions ensue. The first H-atom abstraction leads to intensely colored aminium radical cations, Ar₂NH^.+, some of which are quite stable. However, most undergo a second H-atom abstraction leading to ammonium ions, Ar₂NH₂⁺. In the absence of a ready source of H-atoms, a unique self-abstraction reaction occurs when Ar=Me₅C₆, leading to a novel iminium radical cation, Ar=N^.+Ar, which decays via a second self H-atom abstraction reaction to give a stable iminium ion, Ar=N⁺HAr. These products differ substantially from those derived via photochemically produced diarylnitrenium ions.     

Melamine–Barbiturate Supramolecular Assembly as a pH-Dependent Organic Radical Trap Material

In the last two decades, a large number of self-assembled materials were synthesized and they have already found their way into large-scale industry and science. Hydrogen-bond-based supramolecular adducts are found to have unique properties and to be perfect host structures for trapping target molecules or ions. Such chemical systems are believed to resemble living matter and can substitute a living cell in a number of cases. Herein, a report on an organic material based on supramolecular assembly of barbituric acid and melamine is presented. Surprisingly, the structure is found to host and stabilize radicals under mild conditions allowing its use for biological applications. The number of free radicals is found to be easily tuned by changing the pH of the environment and it increases when exposed to light up to a saturation level. We describe a preparation method as well as stability properties of melamine–barbiturate self-assembly, potentiometric titration, and hydrogen ions adsorption data and EPR spectra concerning the composite.